Uncategorized

Pulse Metering Fuel Pump for 2–5–8KW Chinese Diesel Parking Heaters

English Version

Product Overview

This product is a pulse metering diesel fuel pump for parking air heaters. It acts as a replacement spare part that supplies diesel to the heater in steady pulses. It fits common Chinese diesel air parking heaters rated at 2KW, 5KW and 8KW. It suits trucks, RVs, campers, vans and other on-board heating setups used in cold weather.

Key Selling Points

  • Wide compatibility. It fits common Chinese 2KW, 5KW and 8KW diesel air parking heaters as a direct replacement part.
  • Steady pulse supply. The pump delivers fuel in steady pulses. This helps the heater burn evenly and run more stably.
  • Low noise and low vibration. The working noise and vibration are kept low. The cab or living space stays more comfortable when the vehicle rests.
  • Metal housing. The metal cylindrical body withstands the vibration and rough conditions of on-board use.
  • Easy replacement. It is designed as a replacement part. You remove the old pump and fit the new one to the same mounting and fuel line positions.
  • Two voltage options. 12V and 24V versions are available. Please check your heater voltage before you order.

Compatibility and Specs

ItemDetail
Product typePulse metering diesel fuel pump for parking air heater
Compatible heaterChinese diesel air parking heaters, 2KW / 5KW / 8KW
HousingMetal cylindrical housing
ConnectorsFuel line connectors on both ends
Voltage12V / 24V versions available; confirm the voltage before ordering
Common vehiclesTrucks, RVs, campers, vans, off-road and engineering vehicles
RoleReplacement spare part for the heater fuel supply

Installation Steps

  1. Turn off the heater and let it cool down, then disconnect the power.
  2. Remove the old pump. Note the fuel line and wiring positions before you take them off.
  3. Fit the new pump to the same positions. Reconnect the fuel lines and wiring, then check for leaks before you run the heater.

Notes

  • Confirm the heater power (2 / 5 / 8KW) and the voltage (12V / 24V) before you order.
  • Match the connector and mounting position to your original pump.
  • If you are not sure about the fitment, ask a qualified technician to install it.